Surface treatments
Sandblasting
For the right structure
Fijn
Grof
Extra Grof
Sandblasting
Abresive blasting is a surface treatment that is used to apply a decorative, matte or textured finish on the surface of a product. By applying structure on the surface, the appearance of a product can be improved. Small imperfections, such as scratches, can be removed. Abresive blasting is a method used to make a product visually more interesting.
High Pressure Die Casting
Low Pressure Die Casting
Gravity Casting
Sand casting
Aluminium Extrusion
Plating
Many finishing possibilities
Brushed
Matt
Mirror
Goud
Chroom
Rosé goud
Koper
Goud
Chroom
Rosé goud
Koper
Goud
Chroom
Rosé goud
Koper
Plating
Chrome, nickel and copper plating is a surface treatment that is used to make products visually resemble other materials. Due to an electrical current, the products are provided with a thin layer of chrome, nickel or copper. In addition to the visual changes, mechanical properties such as corrosion resistance and wear resistance are improved.
High Pressure Die Casting
Low Pressure Die Casting
Gravity Casting
Sand casting
Injection Molding
CNC Machining
Anodizing
Properties can be handled
Brushed
Matt
Mirror
Alu geel
Alu look
Koper look
Alu zwart
Alu blauw
Alu rood
Alu groen
Alu geel
Alu look
Koper look
Alu zwart
Alu blauw
Alu rood
Alu groen
Alu geel
Alu look
Koper look
Alu zwart
Alu blauw
Alu rood
Alu groen
Anodizing
Anodizing (NL:anodiseren) is een oppervlaktebehandeling die meestal wordt toegepast op aluminium. Wanneer aluminium wordt blootgesteld aan zuurstof, vormt zich een natuurlijke, dunnen oxide laag op het oppervlak. Met behulp van anodiseren wordt deze oxide laag verdikt en kan de structuur van de laag gecontroleerd worden. De oxide laag die door het anodiseren wordt gevormd is slijtvast, hard en goed bestand tegen corrosievorming. Doordat het oppervlak van de oxide laag microporeus kan zijn, kan het kleurstoffen goed absorberen; er ontstaat dan een aantrekkelijke metallic, gekleurde glans.
Hoge Druk Spuitgieten (alleen alu zwart & alu grijs)
Lage Druk Spuitgieten (alleen alu zwart & alu grijs)
Coquille Gieten (alleen alu zwart & alu grijs)
Zandgieten (alleen alu zwart & alu grijs)
Aluminium Extrusion
CNC Machining
E-Coating
Corrosion-resistant coating in many colors
Gloss
Matt
Elektrolyse
Electrophoretic coating (E-coating) is a surface treatment in which a product is coated with a desired color. Due to a chemical reaction, the products obtain a thin, uniform colored layer that is evenly distributed over the entire surface. The colored layer provides a good corrosion resistance.
High Pressure Die Casting
Low Pressure Die Casting
Gravity Casting
Sand casting
Kunststof Spuitgieten (d.m.v. speciaal ABS-Plastic)
Aluminium Extrusion
CNC Machining
Powdercoating
Long lasting results in many colors
Gloss
Matt
Powdercoating
Powder coating is a surface treatment that is often used as a decorative and protective finish, in which a product is provided with a desired color. It is an environmentally friendly process, because there is no loss of materials – excessive use of powder is recycled again. When applying the powder coating, the product is provided with a uniform distributed colored layer.
High Pressure Die Casting
Low Pressure Die Casting
Gravity Casting
Sand casting
Injection Molding
Aluminium Extrusion
CNC Machining
Spray Painting
Faster and cheaper results
Gloss
Matt
Spray Painting
Spray painting is a surface treatment that, compared to powder coating, offers a relatively inexpensive alternative for decorative applications. While applying the paint, a uniform distributed colored layer is created on the surface of the product. Paint is available in a large array of different variants, taking in- and outdoor use, temperature resistance, surface finishing and the desired color into account.
High Pressure Die Casting
Low Pressure Die Casting
Gravity Casting
Sand casting
Injection Molding
Aluminium Extrusion
CNC Machining